Do you recognise one of these symptoms?
- The array is 'degraded' and a second disk is showing errors
- The rebuild stopped or failed
- The volume is 'crashed', 'inactive' or 'not mounted'
- Two disks are flagged as failed at the same time
- The RAID controller was replaced and offers a 'foreign configuration'
Job sheetRAID-5
- Device
- RAID 5
- Price
- From €350, fixed quote after diagnosis
- Environment
- ISO 5 (class 100) cleanroom if the device must be opened
- Method
- Full image of the device, reconstruction on the copy, never on the original
- Turnaround
- Economy 10–15 working days · Standard 5–10 working days · Emergency Diagnosis in 24–48 hours
- Check
- List of recovered files sent before payment
- Confidentiality
- Data never passed to third parties, copies wiped after delivery
The faults we handle
- Second failure during the rebuild
- A rebuild reads every remaining disk from start to finish: one unreadable sector or one tired disk is enough to stop it.
- A disk dropped long ago
- A disk ejected without an alert holds old data; putting it back mixes two versions of the volume.
- Controller or NAS failure
- The configuration is lost while the disks are fine.
- Handling errors
- The healthy disk pulled instead of the failed one, the array recreated or initialised.
What not to do
- Do not restart a rebuild that has already failed.
- Do not replace a second disk 'to see what happens'.
- Do not recreate the array or import a foreign configuration without knowing what it contains.
- Do not change the order of the disks in the enclosure.
How RAID 5 works
Data is cut into stripes spread across every disk but one, which receives a parity block calculated with an XOR operation. The parity block moves to a different disk on each row. If a disk disappears, every missing block can be recalculated from the other blocks in its row. Usable capacity is that of all the disks minus one.
With large disks, a rebuild takes many hours, during which the array has no protection left. That is why RAID 6 is the better choice beyond four or five high-capacity disks.
How we recover a RAID 5
Every disk is copied, including those reported as failed: even partly readable, they carry useful information. We then identify the stalest disk, the disk order, the stripe size, the parity rotation and the offset. The array is rebuilt virtually, leaving out the out-of-date disk, and missing sectors on one disk are recalculated from the others. Files are extracted and checked before delivery.
RAID 5 simulator: what happens when a disk fails?
Data is striped; one parity block (p) per row moves to a different disk on each line. Fault tolerance: 1 disk. Click one or more disks to simulate a failure.
Price of RAID 5 data recovery
From €350, fixed quote after diagnosis. The diagnosis is free and the quote is fixed: it does not change once accepted. If no data is recovered, you pay nothing. See the full price list.